Reference Guide

– If the repository has to be through a proxy, then the proxy
server address, proxy username and the proxy password
must be specified.
– The Lifecycle Controller must be enabled for repository
update.
Output Firmware update job for <filename> is initiated.
This firmware update job may take several minutes to complete
depending on the component or firmware being updated. To
view the progress of the job, run the racadm jobqueue view
command.
For repository update command, the output is:
Update from repository operation has been
initiated. Check the progress of the operation
using "racadm jobqueue view -i JID_809364633532"
command.
Example
• Upload the update file from a remote CIFS share.
racadm update -f temp_file.exe -u admin -p
mypass -l //1.2.3.4/share
• Upload the update file from a remote NFS share:
racadm update -f temp_file.exe -l //1.2.3.4/
share
• Upload the update file from the local file system using Local
RACADM.
racadm update -f temp_file.exe
• Upload the update file from a remote CIFS share.
racadm update -f temp_file.exe u admin -p
mypass -l //1.2.3.4/share
• Upload the update file from a remote CIFS share and under a
user domain "dom".
racadm update -f temp_file.exe -u dom/admin -
p mypass -l //1.2.3.4/share
• Upload the update file from a remote NFS share.
racadm update -f temp_file.exe -l 1.2.3.4:/
share
• Upload the update file from the local file system using Local
RACADM.
racadm update -f temp_file.exe
142