Reference Guide

traceroute6
Descripti
on
Traces the network path of routers as the packets traverse from
the system to a destination IPv6 address.
To run this subcommand, you must have the Execute Diagnostic
Commands permission.
Synopsis
racadm traceroute6 <IPv6 address>
Input IPv6 – Specifies IPv6 address.
Output
traceroute to fd01::1 (fd01::1) from fd01::3,
30 hops max, 16 byte packets
1 fd01::1 (fd01::1) 14.324 ms 0.26 ms 0.244 ms
update
Descripti
on
Allows you to update the firmware of devices on the server. The
supported firmware image file types are:
• .exe — Windows-based Dell Update Package (DUP)
• .d7
• .pm
The supported catalog files are:
• .xml
• xml.gzip
NOTE: Updating the platforms from the repository is not
supported for IPv6.
Synopsis
racadm update -f <updatefile>
racadm update -f <updatefile> -l <Remote CIFS
Share> -u <username for CIFS share> -p <password
for CIFS share>
racadm update -f <updatefile> -l <Remote NFS
Share>
racadm update –f <catalog file> -t <Repository
type> -l <Remote CIFS/NFS Share> -u <username
140