Reference Guide

testalert
Descripti
on
Tests FQDN supported SNMP trap notifications.
To run this subcommand, you must have the Test Alert User
Access.
Synopsis
racadm testalert -i <index>
Input -i — Specifies the index of the trap test. index must be an
integer from 1 to 8 on iDRAC.
Output
Success: Test trap sent successfully
Failure: Unable to send test trap
Example
• Test a trap with index as 1.
racadm testalert -i 1
Test trap sent successfully.
• Test a trap that has not been configured yet.
racadm testalert -i 2
ERROR: Trap at specified index is not
currently enabled.
traceroute
Descripti
on
Traces network path of the routers as the packets traverse from
the system to a destination IPv4 address.
To run this subcommand, you must have the Execute Diagnostic
Commands permission.
Synopsis
racadm traceroute <IPv4 address>
Input IPv4 — Specifies IPv4 address.
Output
traceroute to 192.168.0.1 (192.168.0.1), 30 hops
max, 40 byte packets
1 192.168.0.1 (192.168.0.1) 0.801 ms 0.246 ms
0.253 ms
139