Reference Guide

Last Week = 0%
Peak Readings
Last Week 0% [At Mon, 05 May 2014 15:58:35]
• To reset the peak utilization of a specific sensor
racadm systemperfstatistics PeakReset iDRAC.Embedded.
1#SystemBoardCPUUsageStat
RAC1163: The peak utilization value of Out-Of-Band
performance monitoring sensor CPU Usage is successfully
reset.
techsupreport
Descripti
on
Allows you to perform the technical support report operations.
The type of operations are:
• collect — Collects the technical support report data to
export. You can specify the various types of logs to be
included in the report.
This operation generates a Job ID. Use this Job ID to check
the status of the collect operation. To run this operation, you
must have the Server Control Commands permission.
• export — Exports the collected Tech Support Report data.
To run this subcommand, you must have the Execute Server
Control Commands permission.
• getupdatetime — Gets the timestamp of the last operating
system application data collection.
• updateosapp — Updates the operating system application
data collection.To run this subcommand, you must have the
Execute Server Control Commands permission.
Synopsis
• To perform the technical support report operation by
specifying the type of operation.
racadm techsupreport <tech support report
command type>
• To collect the report data.
racadm techsupreport collect [-t <type of
logs>]
• To export the collected report data.
racadm techsupreport export -l <CIFS or NFS
share> -u <username> -p <password>
135