Reference Guide

– If the-wom option is specified, then the valid values for -
rp are 1–52
– If the-dow option is specified, then the valid values for -
rp are 1–366.
• -mb: Specifies the maximum backup parameter. For --
vflash maximum backup is 1.
NOTE:
• Avoid using the -l, -u, and -p options with --vFlash
option.
• If a backup file is created in a subfolder within the CIFS
shared folder, then the subfolder name must be
mentioned in the filename option.
Output Job ID is displayed when the back up or restore operation is
successful.
Example
• Back up system to CIFS share and encrypt the data.
racadm systemconfig backup -f image.img -l //
192.168.2.140/share -u admin -p passwd -n
Encryptp@sswd123
• Back up system to NFS share and encrypt the data.
racadm systemconfig backup -f image.img -l
192.168.2.140 :/share -u admin -p passwd -n
Encryptp@sswd123
• Back up system to vFlash SD.
racadm systemconfig backup --vFlash
• Restore system from vFlash SD and clear the VD
configurations.
racadm systemconfig restore -vFlash --
nopreserve
• Restore system from NFS share without clearing the VD
configurations.
racadm systemconfig restore -f image.img -l
192.168.2.140:/share -u admin -p passwd
• Create a backup file in a subfolder within the CIFS shared
folder.
racadm systemconfig backup –f rts/Backup.img –
l //10.94.161.200/CIFSshare –u username –p
password
• To enable or disable AutoBackupScheduler.
racadm set
lifecyclecontroller.lcattributes.autobackup 1
racadm set
lifecyclecontroller.lcattributes.autobackup 0
132