Reference Guide

• -f — Specifies the image location and the file name.
NOTE: If the file is in a subfolder within the share
location, then specify the network share location in the
–l option and specify the subfolder location and the
filename in the
–f option.
• -u — Specifies the user name for the remote share access.
• -p — Specifies the password for the remote share access.
• --vFlash — Selects vFlash SD as target location for back up.
• --nopreserve — Deletes all the virtual disks and
configurations.
• -time: Specifies the time to schedule an autobackup in
HH:MM format. This parameter must be specified.
• -dom: Specifies the day of month to schedule an
autobackup. Valid values are 1–28, L(Last day) or '*' (default
— any day).
• -wom : Specifies the week of month to schedule an
autobackup. Valid values are 1–4, L(Last week) or '*' (default
— any week).
• -dow: Specifies the day of week to schedule an autobackup.
Valid values are sun, mon, tue, wed, thu, fri, sat, or '*' (default
— any day).
NOTE: The -dom, -wom, or -dow option must be included in
the command for the autoupdate schedule. The * value for
the options must be included within ' ' (single quotation
mark).
• If the -dom option is specified, then the -wom and -dom
options are not required.
• If the-wom option is specified, then the-dow is required
and -dom is not required.
• If the-dom option is non-'*', then the schedule repeats
by month.
• If the-wom option is non-'*', then the schedule repeats
by month.
• If the-dom and -wom options are '*' and the -dow option
is non-'*', then the schedule repeats by week.
• If all the three -dom, -wom and -dow options are '*', then
the schedule repeats by day.
• -rp: Specifies the repeat parameter. This parameter must be
specified.
– If the-dom option is specified, then the valid values for -
rp are 1–12.
131