Reference Guide

NOTE:
• To run this subcommand, you require the Server Profile
Export and Import license.
• Backup operation is licensed (Enterprise) but restore
operation is not licensed .
• If Lifecycle Controller is disabled, starting a restore
operation is unsuccessful.
• If CSIOR is disabled, the system inventory can have old
data during the backup operation. An appropriate
warning message is displayed.
• The autobackupscheduler can be enabled or
disabled. For more information about enable or disable,
seeLifecycleController.LCAttributes.autobackup
• The minimum Lifecycle Controller version 1.3 is
required .
Synopsis
• racadm systemconfig backup -f <filename>
<target> [-n passphrase] [-l <location> -u
<user name> -p <password>] [--vFlash]
• racadm systemconfig restore -f <filename>
<target> [-n passphrase ] [--nopreserve] [-l
<location> -u <user name> -p <password>] [--
vFlash]
• To create an AutoBackup Schedule.
racadm systemconfig backup [-f <filename>]
<target> [-n <passphrase>][-l <location> -u
<user name> -p <password>] [--vFlash] -time
<time> [-dom <DayOfMonth>] [-wom
<WeekOfMonth>] [-dow <DayofWeek>] -rp
<repeat> -mb <MaxBackup>
• To view an AutoBackup Schedule.
racadm systemconfig getbackupscheduler
• To delete an AutoBackup Schedule.
racadm systemconfig clearbackupscheduler
NOTE: After the parameters are cleared, the
AutoBackupScheduler is disabled. To schedule the
backup again, enable the AutoBackupScheduler.
Input
• -n — Specifies a pass phrase used to encrypt or decrypt the
configuration data. The pass phrase must have 8 to 32
characters, and one upper and lower case character.
NOTE: This pass phrase is optional.
• -l — Specifies the network share location, can be either CIFS
or NFS.
130