Reference Guide

– This command will blink the specified PCIeSSD device.
racadm storage blink:Disk.Bay.8:Enclosure.Internal.
0-1:PCIeExtender.Slot.3
STOR095 : Storage operation is successfully completed.
– This command will unblink the specified PCIeSSD device.
racadm storage unblink:Disk.Bay.8:Enclosure.Internal.
0-1:PCIeExtender.Slot.3
STOR095 : Storage operation is successfully completed.
• To prepare the specified PCIeSSD device for removal
racadm storage preparetoremove: Disk.Bay.
8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
STOR089 : Successfully accepted the storage
configuration operation.
To apply the configuration operation, create a
configuration job with --realtime option.
To create the required commit jobs, run the jobqueue
command.
For more information about the jobqueue command, enter
the RACADM command "racadm help jobqueue”
• To perform a secure erase on the specified PCIeSSD device.
racadm storage secureerase: Disk.Bay.
8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
RAC1040 : Successfully accepted the storage
configuration operation.
To apply the configuration operation, create a
configuration job, and then restart the server.
To create the required commit and reboot jobs, run the
jobqueue command.
For more information about the jobqueue command, enter
the RACADM command "racadm help jobqueue”
swinventory
Descriptio
n
Displays the list of software objects and associated properties
installed on a server.
NOTE: Lifecycle Controller and CSIOR may not be enabled
to run this subcommand.
Synopsis
racadm swinventory
Input
racadm swinventory
Output
racadm swinventory
128