Reference Guide

• To convert the physical disk drive and assign hot-spare.
– This command converts the specified non-storage physical disk drive
to a storage capable physical disk drive.
racadm storage converttoraid:Disk.Bay.
0:Enclosure.Internal.0-0:RAID.Integrated.1-1
– This command converts the specified physical disk drive to a non-
storage physical disk drive.
racadm storage converttononraid:Disk.Bay.
0:Enclosure.Internal.0-0:RAID.Integrated.1-1
– This command assigns or unassign a global or dedicated hot-spare.
racadm storage hotspare:Disk.Bay.0:Enclosure.Internal.
0-0:RAID.Integrated.1-1 -assign no
racadm storage hotspare:Disk.Bay.0:Enclosure.Internal.
0-0:RAID.Integrated.1-1 -assign yes -type ghs
racadm storage hotspare:Disk.Bay.0:Enclosure.Internal.
0-0:RAID.Integrated.1-1 -assign yes -type dhs -
vdkey:Disk.Virtual.0:RAID.Integrated.1-1
• To get the list of physical disks and properties of the specified PCIeSSD
physical disk.
– This command provides the list of physical disks.
racadm storage get pdisks
Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
Disk.Bay.1:Enclosure.Internal.0-1:RAID.Integrated.1-1
Disk.Bay.2:Enclosure.Internal.0-1:RAID.Integrated.1-1
Disk.Bay.3:Enclosure.Internal.0-1:RAID.Integrated.1-1
Disk.Bay.4:Enclosure.Internal.0-1:RAID.Integrated.1-1
Disk.Bay.5:Enclosure.Internal.0-1:RAID.Integrated.1-1
Disk.Bay.8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
Disk.Bay.6:Enclosure.Internal.0-1:PCIeExtender.Slot.3
Disk.Bay.7:Enclosure.Internal.0-1:PCIeExtender.Slot.3
Disk.Bay.9:Enclosure.Internal.0-1:PCIeExtender.Slot.3
– This command provides the properties of the specified PCIeSSD
physical disk.
racadm storage get pdisks:Disk.Bay.
8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
Disk.Bay.8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
Status = Ok
DeviceDescription = PCIe Solid-State Drive in Slot 8
in Bay 1
Name = Physical Device 8
State = Ready
Size = 745.21 GB
BusProtocol = PCIe
126