Reference Guide

1
Introduction
This document provides information about the RACADM subcommands,
supported RACADM interfaces, and property database groups and object
definitions for the following:
• iDRAC for Blade Servers
• iDRAC on Rack and Tower Servers
Most of the commands mentioned in this document are applicable for multi-
generation servers. That is, the commands are applicable for iDRAC6, iDRAC7,
and iDRAC8. For more information on the commands applicable for a
particular iDRAC version, see the iDRAC RACADM Support Matrix available at
dell.com/esmmanuals.
NOTE:
• From iDRAC version 2.00.00.00, the guide provides information
specific to iDRAC. For information specific to Chassis Management
Controller (CMC) M1000e, refer to Chassis Management Controller
M1000e Version 5.0 RACADM Command Line Reference Guide
available at dell.com/support/manuals.
• The appendix section in the guide provides:
– List of deprecated subcommands.
– List of legacy groups and objects with the equivalent new groups
and objects.
New in This Release
• Support for --nocertwarn option in Remote RACADM version 8.0.1 to
not display the invalid certificate warning.
• Support to display the version for USC as Lifecycle Controller using the
getversion command.
11