Reference Guide

Example Use Remote RACADM to delete the custom signing certificate.
$ racadm -r 192.168.1.1 -u root -p calvin
sslcertdelete -t 3
sslcsrgen
Descripti
on
Generates and downloads a CSR file to the client’s local file
system. The CSR can be used for creating a custom SSL
certificate that can be used for SSL transactions on CMC.
To run this subcommand, you must have the Configure iDRAC
permission.
Synopsis
racadm sslcsrgen -g
racadm sslcsrgen [-g] [-f <filename>]
racadm sslcsrgen -s
Input
• -g — Generates a new CSR.
• -s — Returns the status of a CSR generation process
(generation in progress, active, or none).
• -f — Specifies the filename of the location, <filename>,
where the CSR is downloaded.
NOTE:
• If the -f option is not specified, the filename defaults to
sslcsr in your current directory.
• The -f option is only supported on local and remote
RACADM.
Output If no options are specified, a CSR is generated and downloaded
to the local file system as sslcsr by default. The -g option cannot
be used with the -s option, and the -f option can only be used
with the
-g option.
The sslcsrgen -s subcommand returns one of the following
status codes:
• CSR was generated successfully.
• CSR does not exist.
Example • Display current status of CSR operation:
racadm sslcsrgen -s
109