Users Guide

Using the -level Option
The show -level option executes show over additional levels beneath the specified target. To see all targets and properties
in the address space, use the -l all option.
Using the -output Option
The -output option specifies one of four formats for the output of SM-CLP verbs: text, clpcsv, keyword, and clpxml.
The default format is text, and is the most readable output. The clpcsv format is a comma-separated values format suitable
for loading into a spreadsheet program. The keyword format outputs information as a list of keyword=value pairs one per line.
The clpxml format is an XML document containing a response XML element. The DMTF has specified the clpcsv and clpxml
formats and their specifications can be found on the DMTF website at dmtf.org.
The following example shows how to output the contents of the SEL in XML:
show -l all -output format=clpxml /admin1/system1/logs1/log1
Usage Examples
This section provides use case scenarios for SMCLP:
● Server Power Management
● SEL Management
● MAP Target Navigation
Server Power Management
The following examples show how to use SMCLP to perform power management operations on a managed system.
Type the following commands at the SMCLP command prompt:
● To switch off the server:
stop /system1
The following message is displayed:
system1 has been stopped successfully
● To switch on the server:
start /system1
The following message is displayed:
system1 has been started successfully
● To reboot the server:
reset /system1
The following message is displayed:
system1 has been reset successfully
SEL Management
The following examples show how to use the SMCLP to perform SEL-related operations on the managed system. Type the
following commands at the SMCLP command prompt:
● To view the SEL:
show/system1/logs1/log1
The following output is displayed:
/system1/logs1/log1
Using SMCLP
245