Users Guide

• System Health and Identify LED is flashed at ~1/2 second rate. (LED is located on the back of a rack and tower servers and on the

front of a blade server.)

• Bootloader is now polling the SD card slot.

• Format an SD card with FAT using a Windows operating system, or EXT3 using a Linux operating system.

• Copy firmimg.d7 to the SD card.

• Insert the SD card into the server.

• Bootloader detects the SD card, turns the flashing LED to solid amber, reads the firmimg.d7, reprograms iDRAC, and then reboots

iDRAC.

Using TFTP Server

You can use Trivial File Transfer Protocol (TFTP) server to upgrade or downgrade iDRAC firmware or install certificates. It is used in SM-

CLP and RACADM command line interfaces to transfer files to and from iDRAC. The TFTP server must be accessible using an iDRAC IP

address or DNS name.

NOTE:

If you use iDRAC Web interface to transfer certificates and update firmware, TFTP server is not required.

You can use the netstat -acommand on Windows or Linux operating systems to see if a TFTP server is running. The default port for

TFTP is 69. If TFTP server is not running, do one of the following:

• Find another computer on the network running a TFTP service.

• Install a TFTP server on the operating system.

Backing Up Server Profile

You can backup the system configuration, including the installed firmware images on various components such as BIOS, RAID, NIC, iDRAC,

Lifecycle Controller, and Network Daughter Cards (NDCs) and the configuration settings of those components. The backup operation also

includes the hard disk configuration data, motherboard, and replaced parts. The backup creates a single file that you can save to a vFlash

SD card or network share (CIFS or NFS).

You can also enable and schedule periodic backups of the firmware and server configuration based on a certain day, week, or month.

Backup feature is licensed and is available with iDRAC Enterprise license.

NOTE:

In 13th generation servers, this feature is automatically enabled.

Before performing a backup operation, make sure that:

• Collect System Inventory On Reboot (CSIOR) option is enabled. If CSIOR is disabled and if you initiate a backup operation, the

following message is displayed:

System Inventory with iDRAC may be stale,start CSIOR for updated inventory

• To perform backup on a vFlash SD card:

• A Dell supported vFlash SD card is inserted, enabled, and initialized.

• vFlash SD card has enough space to store the backup file.

The backup file contains encrypted user sensitive data, configuration information, and firmware images that you can use for import server

profile operation.

Backup events are recorded in the Lifecycle Log.

Related concepts

Scheduling Automatic Backup Server Profile

Importing Server Profile

Backing Up Server Profile Using iDRAC Web Interface

To back up the server profile using iDRAC Web interface:

1. Go to Overview > iDRAC Settings > Server Profile.

The Backup and Export Server Profile page is displayed.

2. Select one of the following to save the backup file image:

Setting Up Managed System and Management Station