Users Guide

NOTE: If the default HTTPS port number (port 443) has been changed, type: https://[FQDN address]:[port

number] where, [FQDN address] is the iDRAC FQDN (iDRACdnsname.domain. name) and [port number] is the

HTTPS port number.

NOTE: If you use IP address instead of FQDN, SSO fails.

iDRAC logs you in with appropriate Microsoft Active Directory privileges, using your credentials that were cached in the operating

system when you logged in using a valid Active Directory account.

Logging into iDRAC SSO Using CMC Web Interface

Using the SSO feature, you can launch iDRAC Web interface from CMC Web interface. A CMC user has the CMC user privileges when

launching iDRAC from CMC. If the user account is present in CMC and not in iDRAC, the user can still launch iDRAC from CMC.

If iDRAC network LAN is disabled (LAN Enabled = No), SSO is not available.

If the server is removed from the chassis, iDRAC IP address is changed, or there is a problem in iDRAC network connection, the option to

Launch iDRAC is grayed-out in the CMC Web interface.

For more information, see the Chassis Management Controller User’s Guide available at dell.com/support/manuals.

Accessing iDRAC Using Remote RACADM

You can use remote RACADM to access iDRAC using RACADM utility.

For more information, see the RACADM Reference Guide for iDRAC and CMC available at dell.com/support/manuals.

If the management station has not stored the iDRAC’s SSL certificate in its default certificate storage, a warning message is displayed

when you run the RACADM command. However, the command is executed successfully.

NOTE:

The iDRAC certificate is the certificate iDRAC sends to the RACADM client to establish the secure session. This

certificate is either issued by a CA or self-signed. In either case, if the management station does not recognize the CA

or signing authority, a warning is displayed.

Related tasks

Validating CA Certificate To Use Remote RACADM on Linux

Validating CA Certificate To Use Remote RACADM on

Linux

Before running remote RACADM commands, validate the CA certificate that is used for secure communications.

To validate the certificate for using remote RACADM:

1. Convert the certificate in DER format to PEM format (using openssl command line tool):

openssl x509 -inform pem -in [yourdownloadedderformatcert.crt] –outform pem -out

[outcertfileinpemformat.pem] –text

2. Find the location of the default CA certificate bundle on the management station. For example, for RHEL5 64-bit, it is /etc/pki/tls/

cert.pem.

3. Append the PEM formatted CA certificate to the management station CA certificate.

For example, use the cat command: - cat testcacert.pem >> cert.pem

4. Generate and upload the server certificate to iDRAC.

Accessing iDRAC Using Local RACADM

For information to access iDRAC using local RACADM, see the iDRAC8 RACADM Command Line Interface Reference Guide available at

dell.com/support/manuals.

Logging into iDRAC