Users Guide

2. Click Test Settings.
3. Enter the user name and password of a directory user that is chosen to test the LDAP settings. The format depends on the Attribute
of User Login is used and the user name entered must match the value of the chosen attribute.
NOTE: When testing LDAP settings with Enable Certificate Validation checked, iDRAC requires that the LDAP server
be identified by the FQDN and not an IP address. If the LDAP server is identified by an IP address, certificate
validation fails because iDRAC is not able to communicate with the LDAP server.
NOTE: When generic LDAP is enabled, iDRAC first tries to login the user as a directory user. If it fails, local user
lookup is enabled.
The test results and the test log are displayed.
Testing LDAP Directory Service Settings Using RACADM
To test the LDAP directory service settings, use the testfeature command. For more information, see the iDRAC8 RACADM
Command Line Interface Reference Guide available at dell.com/support/manuals.
132 Configuring User Accounts and Privileges