Users Guide

NOTE: If the attached vFlash partition(s) are not listed in the First Boot Device drop-down menu,
make sure that the BIOS is updated to the latest version.
Booting to a Partition Using RACADM
To set a vFlash partition as the first boot device, use cfgServerInfo. For more information, see the
iDRAC8 RACADM Command Line Interface Reference Guide available at dell.com/support/manuals.
NOTE: When you run this command, the vFlash partition label is automatically set to boot once—
cfgserverBootOnce is set to 1. Boot once boots the device to the partition only once and does
not keep it persistently first in the boot order.
285