Release Notes

Issue 38:
Description
Infrequently, iDRAC logs the following message to the Lifecycle Controller log:
PWR2262 "The Intel Management Engine has reported an internal system error"
Also, logs the following within the next few minutes:
PWR2264 "The Intel Management Engine has reported normal system operation".
Resolution
No action required.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 39:
Description
In iDRAC Web interface, the following storage pending operations status is not displayed in Pending
Operations popup message and Storage->Pending Operations page:
• Virtual Disk(s) - Encrypt operations.
• Controller(s) - Create, Modify, or Delete security key operations.
• Controller(s) - Import or Clear Foreign Configuration operations.
• PCIe SSD(s) - Secure Erase or Prepare to Remove operations.
Resolution
None.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8
Issue 40:
Description
When a passive backplane (that is not connected to PERC) is updated from the operating system, the
System Inventory page in the iDRAC Web interface does not display the updated version.
Resolution
Reset iDRAC using racadm racreset command.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8
Issue 41:
Description
On 13th generation PowerEdge systems, if the system has no boot devices (in the BIOS boot list or the
UEFI boot list), exporting the configuration does not work.
Resolution
Add a boot device to the system, run CSIOR, and retry the export configuration operation.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.