Connectivity Guide

Access MIB group and lists the MIB group number assigned to the MIB group. The Server Administrator
Remote Access MIB groups are identified by the SNMP OID 1.3.6.1.4.1.674.10892.1.<MIB group number>
where <MIB group number> is the MIB group number assigned to the MIB group. See the relevant section
for more information about the MIB objects defined in a MIB group.
Table 1. Server Administrator Remote Access MIB Sections in This Guide
Section Topic MIB Group Numbers
19 Remote Access Group — provides information about
remote access hardware that may be present in your
system and defines variables for administrative users,
SNMP trap destinations, modem configuration for dial-up
networking, dial-in configuration, and dial-out
destinations
1700
Dell Remote Access Controller Out-of-Band MIB
The Dell Remote Access Controller Out-of-Band MIB (filename dellRAC.mib) provides management data
that allows you to monitor the Chassis Management Controller. This MIB also contains information on
RAC legacy alerting. The following table describes each Dell RAC Out-of-Band group and lists the MIB
group number assigned to the MIB group. See the relevant section for more information about the MIB
objects defined in a MIB group.
Table 2. Dell RAC Out-of-Band MIB
Section Topics MIB Group Number
25 The Dell RAC Out-of-Band MIB consists of information
for the following groups:
• Product Information
• Chassis Status
• Chassis Power
• CMC Power Information
• CMC PSU Information
• Chassis Alerts
• Legacy Alerting
2
How This Guide Defines Technical Terms
The following table provides information about where to find definitions for technical terms in this
reference guide.
Table 3. Where to Find Definitions for Technical Terms
Type of Definition See
Basic SNMP vocabulary. Introduction
MIB-group-specific variable values. MIB-group-specific MIB
variables contain links to the tables that define these values in the
last section of the section in which these variables are used.
Sections 3, 5, 7, 8, 9, and 11
through 18.
7