Connectivity Guide

iDRAC8 SNMP Data Security Features
iDRAC8 firmware supports the following data security features:
SNMP security lockout feature
iDRAC8 supports a simply, non-configurable SNMP security lockout feature. If more than six
SNMPv3 USM authentication failures occur within a 2-minute window, then the iDRAC8 SNMP
Agent blocks all subsequent SNMPv3 requests/queries for 10 minutes.
Restriction of access to sensitive data
Some of the MIB data that iDRAC8 supports can only be accessed via SNMPv3 queries. Access to
such data is blocked for SNMPv1 and SNMPv2c queries.
Currently, the following one attribute, and one table, are considered to be “sensitive” data and
have this restriction:
* numLCLogEntries (which has an SNMP OID of: 1.3.6.1.4.1.674.10892.5.4.300.2.0)
* lcLogTable (which has an SNMP OID of: 1.3.6.1.4.1.674.10892.5.4.300.90)
iDRAC8 Out-of-Band Group
The objects of the Integrated Dell Remote Access Controller (iDRAC) MIB (iDRAC-MIB.txt) are organized
into subgroups of the iDRAC8 Out-of-Band Group. The subgroups are:
RAC Information Group
Chassis Information Group
System Information Group
Status Group
System Details Group
Storage Details Group
The following sections document the subgroups and the objects within each subgroup.
RAC Information Group
The RAC Information Group objects provide information about the iDRAC.
Table 22. RAC Name
Name
racName
Object ID 1.3.6.1.4.1.674.10892.5.1.1.1.0
Description This attribute defines the product name of a remote access card.
Syntax StringType
Access Read-only
Table 23. RAC Name
Name
racShortName
Object ID 1.3.6.1.4.1.674.10892.5.1.1.2.0
Description This attribute defines the short product name of a remote access card.
23