Reference Guide

ManualsBrandsDell ManualsActive System ManageriDRAC7 with Lifecycle Controller Version 2.40.40.40

NOTE: Lifecycle Controller and CSIOR may not be enabled to run this subcommand.

Synopsis

racadm swinventory

Input

racadm swinventory

Output

racadm swinventory

------------------SOFTWARE INVENTORY-------------------

ComponentType = FIRMWARE

ElementName = Power Supply.Slot.2

FQDD = PSU.Slot.2

InstallationDate = 2013-06-11T13:02:46Z

Current Version = 07.2B.7D

---------------------------------------------------------------

ComponentType = FIRMWARE

ElementName = Integrated Remote Access Controller

FQDD = iDRAC.Embedded.1-1

InstallationDate = NA

Rollback Version = 1.50.50

----------------------------------------------------------------

ComponentType = FIRMWARE

ElementName = Integrated Remote Access Controller

FQDD = iDRAC.Embedded.1-1

InstallationDate = 2013-06-11T13:02:48Z

Current Version = 1.50.50

NOTE: Configuration changes and firmware updates that are made within the operating system may not reflect properly

in the inventory until you perform a server restart.

systemconfig

Description

Enables you to perform the following:

• Backup and restore for iDRAC and entire system configuration.

• Automatic scheduling of backup operation.

• View the auto backup feature settings.

• Clear the auto backup feature settings.

NOTE:

• To run this subcommand, you require the Server Profile Export and Import license.

• Backup operation is licensed (Enterprise) but restore operation is not licensed.

• If Lifecycle Controller is disabled, starting a restore operation is unsuccessful.

• If CSIOR is disabled, the system inventory can have old data during the backup operation. An

appropriate warning message is displayed.

• The autobackupscheduler can be enabled or disabled. For more information about enable or

disable, see LifecycleController.LCAttributes.autobackup

• The minimum Lifecycle Controller version 1.3 is required.

Synopsis

• racadm systemconfig backup -f <filename> <target> [-n passphrase] [-l

<location> -u <user name> -p <password>] [--vFlash]

• racadm systemconfig restore -f <filename> <target> [-n passphrase ] [--

nopreserve] [-l <location> -u <user name> -p <password>] [--vFlash]

• To create an AutoBackup Schedule.

racadm systemconfig backup [-f <filename>] <target> [-n <passphrase>][-l

<location> -u <user name> -p <password>] [--vFlash] -time <time> [-dom

<DayOfMonth>] [-wom <WeekOfMonth>] [-dow <DayofWeek>] -rp <repeat> -mb