Reference Guide

• To generate and view information about the inventory of enclosures, run the following command:
racadm storage get enclosures -o
racadm storage get enclosures --refkey <connector FQDDs separated by
comma>
racadm storage get enclosures --refkey <connector FQDDs separated by
comma> -o -p <property names separated by comma>
• To get the list of enclosures, run the following command:
racadm storage get enclosures
• To get the properties of the PCIeSSD enclosure, run the following command:
racadm storage get enclosures:<PCIeSSD enclosure FQDD>
• To generate and view information about the inventory of physical disk drives, run the following command:
racadm storage get pdisks
racadm storage get pdisks -o
racadm storage get pdisks -o -p <property names separated by comma>
racadm storage get pdisks --refkey <enclosure/Backplanes FQDDs separated
by comma>
racadm storage get pdisks --refkey <enclosure/Backplanes FQDDs separated
by comma> -o
racadm storage get pdisks --refkey <enclosure/Backplanes FQDDs separated
by comma> -o -p <property names separated by comma>
• To get the list of physical disks, run the following command:
racadm storage get pdisks
• To get the properties of PCIeSSD physical disk, run the following command:
racadm storage get pdisks:<PCIeSSD FQDD>
• To generate and view information about the inventory of fans, run the following command:
racadm storage get fans --refkey <enclosure FQDDs separated by comma>
racadm storage get fans --refkey <enclosure FQDDs separated by comma > -o
racadm storage get fans --refkey <enclosure FQDDs separated by comma> -o -
p <property names separated by comma>
• To generate and view information about the inventory of EMMs, run the following command:
racadm storage get emms -refkey <enclosure FQDDs separated by comma>
racadm storage get emms --refkey <enclosure FQDDs separated by comma> -o
racadm storage get emms --refkey <enclosure FQDDs separated by comma> -o -
p <property names separated by comma>
• To generate and view information about the inventory of PSU, run the following command:
racadm storage get psus -refkey <enclosure FQDDs separated by comma>
racadm storage get psus --refkey <enclosure FQDDs separated by comma> -o
racadm storage get psus --refkey <enclosure FQDDs separated by comma> -o -
p <property names separated by comma>
Configuration
• To view the help details for a configuration command, run the following command:
racadm storage help <command>
where command can take below values
converttoraid, converttononraid, controllers, clearconfig,
createsecuritykey, createvd, deletesecuritykey, deletevd, encryptvd,
enclosures, emms, fans, hotspare, importconfig, ccheck, secureerase,
preparetoremove, blink, unblink, cancelcheck, init, modifysecuritykey,
psus, pdisks, resetconfig, tempprobes, vdisks, and patrolread.
76