Reference Guide

NIC.FCoEGenParams.FCoEFabricDiscoveryRetryCnt (Read or Write)
Description
Retry count for FCoE fabric discovery.
Legal Values
Values: 0–60
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
NIC.FCoEGenParams.FCoEFirstHddTarget (Read or Write)
Description
Specifies whether the FCoE target is represented as the first HDD to the system.
Legal Values
• Enabled
• Disabled
Default Value
Disabled
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
NIC.FCoEGenParams.FCoELnkUpDelayTime (Read or Write)
Description
Specifies the time FCoE Initiator waits after an Ethernet link is established before sending any data over the
network. Units are in seconds.
Legal Values
Values: 0–255
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
NIC.FCoEGenParams.FCoELunBusyRetryCnt (Read or Write)
Description
Specifies the number of connection retries the FCoE boot initiator will attempt if the FCoE target LUN is busy.
Legal Values
Values: 0–60
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
NIC.FCoEGenParams.FCoETgtBoot (Read or Write)
Description
Enables the FCoE initiator to start system to the FCoE target.
Legal Values
• Enabled
348