Reference Guide

iDRAC.Serial.Command (Read or Write)
Description
Specifies a serial command that is executed after the user logs in to the serial console interface.
Legal Values
String of up to 128 ASCII characters
Default Value Not Applicable
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
iDRAC.Serial.Enable (Read or Write)
Description
Enables or disables the iDRAC serial console interface.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default Value
0 — Disabled
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
iDRAC.Serial.HistorySize (Read or Write)
Description
Specifies the maximum size of the serial history buffer.
Legal Values
Integral values from 0 to 8192.
Default Value
8192
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
iDRAC.Serial.IdleTimeout (Read or Write)
Description
The maximum number of seconds to wait before an idle serial console session is disconnected.
Legal Values
• 0 — No timeout
• Integral values: 60–10800
Default Value
300
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
238