Reference Guide

Input
• —i <session_ID> — The session ID of the session to close, which can be retrieved using RACADM
getssninfo subcommand.
Session running this command cannot be closed.
• —a — Closes all sessions.
• —u <username> — Closes all sessions for a particular user name.
Output
Successful or error message is displayed.
Example
• Closes the session 1234.
racadm closessn -i 1234
• Closes all the sessions other then the active session for root user.
racadm closessn –u root
• Closes all the sessions.
racadm closessn –a
clrsel
Description
Removes all the existing records from the System Event Log (SEL).
To use this subcommand, you must have Clear Logs permission.
Synopsis
racadm clrsel [-m <module>]
Input -m <module> must be one of the following values:
• server-<n> — where n=1 to 16
• server-<nx> — where n=1 to 8; x = a, b, c, d (lower case)
Example
• racadm clrsel
The SEL was cleared successfully
• racadm clrsel -m server-1
Clear SEL log on server 1
config
Description
Allows you to set iDRAC configuration parameters individually or to batch them as part of a configuration file
and then modify iDRAC configuration properties. If the data is different, the iDRAC object is written with a
new value.
NOTE: This subcommand will be deprecated in the later versions. For information about
configurations, see the set subcommand.
Synopsis
• racadm config -g <group> -o <object> <value>
• racadm config -g <group> -o <object> -i <index> <value>
• racadm config -f <filename> -o [-c] [-p] [-continue]
23