Reference Guide

• 4 — LOM3
• 5 — LOM4
Default Value
1 — Dedicated
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
NOTE: Values for the platforms with single LOM port are, 1 — Dedicated and 2 — LOM1.
iDRAC.NIC.SharedNICScanTime (Read or Write)
Description
Wait time for the iDRAC to switch from shared mode to dedicated mode.
Legal Values
Integral values: 5–255
Default Value
30
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
iDRAC.NIC.Speed (Read or Write)
Description
Specifies the speed for iDRAC NIC.
NOTE: To set this property:
• iDRAC.NIC.Selection must be set to Dedicated mode.
• iDRAC.NIC.Autoneg must be disabled.
•
iDRAC.IPv4.Enable, iDRAC.IPv4.DHCPEnable, iDRAC.IPv6.Enable, and
iDRAC.IPv6.AutoConfig must be enabled.
Legal Values
• 0 — 10
• 1 — 100
• 2 — 1000
NOTE: You cannot manually set the Network Speed to 1000 MB. This option is available only if
iDRAC.NIC.Autoneg is set to 1 (Enabled).
Default Value 1 — 100
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
Cannot change NIC Speed unless AutoNeg is set to disabled.
iDRAC.NIC.VLanEnable (Read Only)
Description
Enables or disables the VLAN capabilities of the iDRAC.
NOTE: This object is applicable only to iDRAC on Racks and Towers.
Legal Values
• 0 — Disabled
227