Reference Guide

cfgVFlashSDLicensed (Read Only)
Description
Displays whether an SD card or vFlash SD card is inserted. The vFlash SD card supports the new enhanced
vFlash features and the SD card supports only the limited vFlash features.
Legal Values
• 0(SD card is inserted)
• 1(vFlash SD card is inserted)
Default
None
cfgVFlashSDAvailableSize (Read Only)
Description
Displays the available memory (in MB) on the vFlash SD card that can be used to create new partitions.
Legal Values
A string of up to 64 characters.
Default
If the card is not initialized, default is 0. If initialized, displays the unused memory on the card.
cfgVFlashSDHealth (Read Only)
Description
Displays the current health status of the vFlash SD card.
Legal Values
String:
• OK
• Warning
• Critical
• Unknown
Default
OK
cfgVFlashSDWriteProtect (Read Only)
Description
Displays whether the physical WriteProtect latch on the vFlash SD card is enabled or disabled.
Legal Values
• 0 (vFlash is not write-protected)
• 1 (vFlash is write-protected)
Default
None
cfgVFlashPartition
This group is used to configure properties for individual partitions on the vFlash SD Card. Up to 16 partitions are supported, indexed
from 1 to 16.
NOTE: For SD cards, the index value is limited to 1 because only a single partition of size 256MB is allowed.
The following sections provide information about the objects in the cfgVFlashPartition group.
cfgVFlashPartitionIndex (Read Only)
Description
The index value of the partition.
Legal Values
Integer 1–16
158