Reference Guide

cfgIPv6StaticDNSServer2 (Read or Write)
Description
Specifies the DNS server 2 static IPv6 address.
Legal Values
Any IPv6 address
Default
cfgIPv6URL
This group specifies properties used to configure iDRAC IPv6 URL.
The following sections provide information about the objects in the cfgIPv6URL group.
cfgIPv6URLstring (Read Only)
Description
The iDRAC IPv6 URL.
Legal Values
A string of up to 80 characters.
Default
<blank>
cfgIpmiSerial
This group specifies properties used to configure the IPMI serial interface of the BMC.
It is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade Servers.
cfgIpmiSerialBaudRate (Read or Write)
Description
Specifies the baud rate for a serial connection over IPMI.
Legal Values
9600, 19200, 57600, 115200
Default
57600
cfgIpmiSerialChanPrivLimit (Read or Write)
Description
Specifies the maximum privilege level allowed on the IPMI serial channel.
Legal Values
• 2 (User)
• 3 (Operator)
• 4 (Administrator)
Default
4
cfgIpmiSerialConnectionMode (Read or Write)
Description
When the iDRAC cfgSerialConsoleEnable property is set to 0(disabled), the iDRAC serial port becomes
the IPMI serial port. This property determines the IPMI defined mode of the serial port.
In Basic mode, the port uses binary data with the intent of communicating with an application program on the
serial client. In Terminal mode, the port assumes that a dumb ASCII terminal is connected and allows simple
commands to be entered.
Legal Values
• 0(Terminal)
152