Reference Guide

Default
0
cfgSerialConsoleQuitKey (Read or Write)
Description
This key or key combination terminates Virtual Console text for iDRAC when using the console com2
command.
Legal value: ^ follows any alphabet (a-z, A-Z) ^ follows the listed special characters: [ ] \ ^ _
NOTE: The CTRL key is represented by using the ^ (carat) character.
NOTE: The CTRL key does not generate a character by itself, but must be struck simultaneously
with another key to generate a character.
For example, striking both the CTRL key and the \ key simultaneously (rather than sequentially) is denoted as
^\.
Configuration options: The value must start with the ^ character, and must follow one of the characters — a-
z, A-Z, [,], \
In the input command, use \ without the quotes. For example:
config -g cfgSerial -o cfgSerialConsoleQuitKey "SHIFT+6"\\
Default: <Ctrl> \
cfgSerialConsoleIdleTimeout (Read or Write)
Description
The maximum number of seconds to wait before an idle serial session is disconnected.
Legal Values
• 0 = No timeout
• 60–1920
Default
300
cfgSerialConsoleNoAuth (Read or Write)
Description
Enables or disables the serial console login authentication.
Legal Values
• 0 — (enables serial login authentication)
• 1 — (disables serial login authentication)
Default
0
cfgSerialConsoleCommand (Read or Write)
Description
Specifies a serial command that is executed after a user logs in to the serial console interface.
Legal Values
A string of up to 128 characters.
Default
<blank>
cfgSerialHistorySize (Read or Write)
Description
Specifies the maximum size of the serial history buffer.
Legal Values
0–8192
Default
8192
116