Reference Guide

cfgStaticLanNetworking
This group contains parameters to configure the device NIC for IPv4.
NOTE: A few objects in this group may require the device NIC to be reset, that may cause a brief loss in connectivity.
cfgNicStaticEnable (Read or Write)
Description
Enables or disables the NIC.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default
1 — Enabled
NOTE: If this object is modified, then the object cfgNicEnable is also modified.
cfgNicStaticIPv4Enable (Read or Write)
Description
Enables or disables the IPv4 stack.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default
1 — Enabled
NOTE: If this object is modified, then the object cfgNicIPv4Enable is also modified.
cfgNicStaticIpAddress (Read or Write)
Description
Returns or sets the current IPv4 address.
NOTE: Only set the current IPv4 address if cfgNicUseDhcp is set to 0(false).
Legal Values
Any Valid IPv4 address
Default
192.168.0
cfgNicStaticUseDhcp (Read or Write)
Description
Specifies whether DHCP is used to configure the IPv4 network.
Legal Values
• 0 — IP Address, subnet mask and gateway are configured on the device.
• 1 — IP Address, subnet mask and gateway are assigned from the DHCP server.
Default
0 — Do not use DHCP
NOTE: If this object is modified, then the object cfgNicUseDhcp is also modified.
cfgNicStaticNetmask (Read or Write)
Description
Returns or sets the static IPv4 Netmask.
106