API Guide

HTTP Method Type Description URI Metadata Reference

GET Get Event Service detailed

information

/redfish/v1/EventService EventService.xml

POST Register an event notification

receiver

/redfish/v1/EventService/Subscriptions EventDestination.xml

DELETE Remove a subscription /redfish/v1/EventService/

Subscriptions /<Subscription ID>

EventService.xml

PowerEdge FX2/FX2s Chassis Management using iDRAC Redfish

On a PowerEdge FX2/FX2s chassis, iDRAC can monitor and manage chassis components such as fans, power supplies, and so on.

Redfish service provides information about chassis components when Chassis Management and Monitoring is set to Enabled on

iDRAC. This setting allows you to monitor and manage the chassis even if the CMC is not on the network. On an FX2/FX2s CMC,

ensure that the Chassis Management at Server setting is set to Monitor or Manage and Monitor. While this feature is enabled,

iDRAC also generates Redfish notifications for chassis events.

Configuring Chassis Management and Monitoring using iDRAC web interface

1. In iDRAC web interface, click Overview → iDRAC Settings → CMC.

2. Under Chassis Management → Capability from iDRAC at the Server section, select the Enabled check box. To disable the

service, clear the check box.

Configuring Chassis Management and Monitoring using iDRAC RACADM

To configure the chassis management and monitoring using RACADM, type

racadm set system.chassiscontrol.chassismanagementmonitoring Enabled

For more information on Chassis Management and Monitoring, see the iDRAC User’s Guide available at dell.com/idracmanuals.