Users Guide

• Delete and Replace - Deletes and replaces the RAID level, virtual disk, controller attributes, and hard disk conguration
information in the system with the data from the backup image le.
6. Click Import.
The import server prole operation is initiated.
Importing server prole using RACADM
To import the server prole using RACADM, use the systemcong restore command.
For more information, see the iDRAC RACADM Command Line Interface Reference Guide available at dell.com/idracmanuals.
Restore operation sequence
The restore operation sequence is:
1. Host system shuts down.
2. Backup le information is used to restore the Lifecycle Controller.
3. Host system turns on.
4. Firmware and conguration restore process for the devices is completed.
5. Host system shuts down.
6. iDRAC rmware and conguration restore process is completed.
7. iDRAC restarts.
8. Restored host system turns on to resume normal operation.
Monitoring iDRAC using other Systems Management tools
You can discover and monitor iDRAC using Dell Management Console or Dell OpenManage Essentials. You can also use Dell Remote
Access Conguration Tool (DRACT) to discover iDRACs, update rmware, and set up Active Directory. For more information, see the
respective user’s guides.
76