Users Guide

Related links

Updating single device rmware

Updating rmware using repository

Updating rmware using FTP, TFTP, or HTTP

Updating device rmware using RACADM

Scheduling automatic rmware updates

Updating rmware using CMC web interface

Updating rmware using DUP

Updating rmware using remote RACADM

Updating rmware using Lifecycle Controller Remote Services

Updating rmware using iDRAC web interface

You can update the device rmware using rmware images available on the local system, from a repository on a network share (CIFS

or NFS), or from FTP.

Updating single device rmware

Before updating the rmware using single device update method, make sure that you have downloaded the rmware image to a

location on the local system.

NOTE: Ensure that the le name for the single component DUP does not have any blank space.

To update single device rmware using iDRAC web interface:

1. Go to Overview → iDRAC Settings → Update and Rollback.

The Firmware Update page is displayed.

2. On the Update tab, select Local as the File Location.

3. Click Browse, select the rmware image le for the required component, and then click Upload.

4. After the upload is complete, the Update Details section displays each rmware le uploaded to iDRAC and its status.

If the rmware image le is valid and was successfully uploaded, the Contents column displays a plus icon ( ) icon next to the

rmware image le name. Expand the name to view the Device Name, Current, and Available rmware version information.

5. Select the required rmware le and do one of the following:

• For rmware images that do not require a host system reboot, click Install. For example, iDRAC rmware le.

• For rmware images that require a host system reboot, click Install and Reboot or Install Next Reboot.

• To cancel the rmware update, click Cancel.

When you click Install, Install and Reboot, or Install Next Reboot, the message Updating Job Queue is displayed.

6. To display the Job Queue page, click Job Queue. Use this page to view and manage the staged rmware updates or click OK to

refresh the current page and view the status of the rmware update.

NOTE: If you navigate away from the page without saving the updates, an error message is displayed and all the

uploaded content is lost.