Users Guide

Interface or Protocol Description
For more information, see the following:
• Lifecycle Controller-Remote Services User’s Guide available at dell.com/idracmanuals.
• Lifecycle Controller Integration Best Practices Guide available at dell.com/support/manuals.
• Lifecycle Controller page on Dell TechCenter — delltechcenter.com/page/Lifecycle+Controller
• Lifecycle Controller WS-Management Script Center — delltechcenter.com/page/Scripting+the
+Dell+Lifecycle+Controller
• MOFs and Proles — delltechcenter.com/page/DCIM.Library
• DTMF website — dmtf.org/standards/proles/
iDRAC port information
The following ports are required to remotely access iDRAC through rewalls. These are the default ports iDRAC listens to for
connections. Optionally, you can modify most of the ports. To do this, see Conguring services.
Table 4. Ports iDRAC listens for connections
Port Number Function
22* SSH
23* Telnet
80* HTTP
443* HTTPS
623 RMCP/RMCP+
161* SNMP
5900* Virtual Console keyboard and mouse redirection, Virtual Media, Virtual Folders, and Remote File
Share
5901 VNC
When VNC feature is enabled, the port 5901 opens.
* Congurable port
The following table lists the ports that iDRAC uses as a client.
Table 5. Ports iDRAC uses as client
Port Number Function
25* SMTP
53 DNS
68 DHCP-assigned IP address
69 TFTP
162* SNMP trap
28