Reference Guide

● Upload a valid key to iDRAC User 2 in the first key space using a file.
$ racadm sshpkauth -i 2 -k 1 -f pkkey.key
Key file successfully uploaded.
● Get all keys for User 2 on iDRAC.
$ racadm sshpkauth -v -i 2 -k all
********************* User ID 2 ******************
Key ID 1:
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAzzy+k2npnKqVEXGXIzo0sbR6JgA5YNbWs3ekoxXV
fe3yJVpVc/
5zrrr7XrwKbJAJTqSw8Dg3iR4n3vUaP+lPHmUv5Mn55Ea6LHUslAXFqXmOdlThd
wilU2VLw/iRH1ZymUFnut8ggbPQgqV2L8bsUaMqb5PooIIvV6hy4isCNJU=
1024-bit RSA, converted from OpenSSH by [e-mail]
Key ID 2:
Key ID 3:
Key ID 4:
sslcertdownload
Description
Downloads an SSL certificate from iDRAC to the client’s file system.
To run this subcommand, you must have the Server Control privilege.
NOTE: This subcommand is only supported on the remote interface(s).
Synopsis
racadm sslcertdownload -f <filename> -t <type>
Input
● -f — Specifies the target filename on local file system to download the certificate.
● -t <type> — Specifies the type of certificate to download, either the CA certificate for Directory
Service or the server certificate.
○ 1=server certificate
○ 2=Active Directory
Output Returns 0 when successful and non-zero number when unsuccessful.
Example
● Download server certificate:
racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 1 -f cert.txt
● Download Active Directory certificate:
racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 2 -f ad_cert.txt
NOTE: This command is not supported in the firmware RACADM interface as it is not a file system.
76 RACADM Subcommand Details