Reference Guide

● Reset when vFlash Partition creation is in progress.
racadm racresetcfg
A vFlash SD card partition operation is in progress. Resetting the iDRAC may corrupt the vFlash SD
card. To force racresetcfg, use the -f flag.
remoteimage
Description Connects, disconnects, or deploys a media file on a remote server.
To run this subcommand, you must log in with virtual media privilege for iDRAC.
Synopsis
● racadm remoteimage [-m <module> | -a]
●
racadm remoteimage -d [-m <module> | -a]
● racadm remoteimage -s [-m <module> | -a]
●
racadm remoteimage -c [-m <module> | -a] [-u <username> -p <password>
-l <image_path>]
● racadm remoteimage -e [-m <module> | -a] [-u <username> -p <password>
-l <image_path>]
Input
● -c — Connect the image.
● -d — Disconnect image.
● -l — Image location on the network share; use single quotation marks around the location.
● -s — Display current status.
NOTE: Use a forward slash (/) when providing the image location. If backward slash (\) is used,
override the backward slash for the command to run successfully.
For example:
racadm remoteimage -c -u user -p xxx -l /\/\192.168.0.2/\CommonShare/
\diskette
NOTE: The following options only apply to connect and deploy actions
● -u — Username.
User name to access the network share. For domain users, you can use the following formats:
○ domain/user
○ domain\user
○ user@domain
● -p — Password to access the network share.
Example
● Configure a Remote image.
racadm remoteimage -c -u "user" -p "xxx" -l //shrloc/foo.iso
Remote Image is now Configured
● Disable Remote File Sharing.
racadm remoteimage -d
Disable Remote File Started. Please check status using -s option to
know Remote File Share is ENABLED or DISABLED.
68 RACADM Subcommand Details