Reference Guide

gettracelog
Description
Lists all the trace login entries of iDRAC.
Synopsis
● racadm gettracelog [-i]
●
racadm gettracelog [-s <start>] [-c <count>] [--more]
Input
● —i — Displays the number of entries in iDRAC trace log.
● --more — Displays one screen at a time and prompts the user to continue (similar to the UNIX more
command).
● -c — Specifies the number of records to display.
● -s — Specifies the starting record to display.
Output
The default output display shows the record number, timestamp, source and description. The timestamp
begins at midnight, January 1 and increases until the system starts. After the system starts, the system’s
timestamp is used.
Example
● Display entire log
racadm gettracelog
● Display number of records in log
racadm gettracelog -i
Total Records: 228
getversion
Description
Displays the current software version, model and generation information, and whether the target device
can be updated.
Synopsis
● racadm getversion
● racadm getversion [-b | -c | —i]
● racadm getversion [-f <filter>]
Input
● -c — Displays the server's current CPLD version.
● -b — Displays the server's current BIOS version.
● -i — Displays the server's current IDSDM version.
● -f <filter> — Filters the components and must be one of the following values:
○ bios: BIOS
○ idrac: iDRAC
○ lc: Lifecycle Controller
○ idsdm: SD card
racadm getversion -c
<
Server > < CPLD Version > < Blade Type >
server-1 1.0.5 PowerEdgeM520
RACADM Subcommand Details 47