Reference Guide

DIMM B7 N/A Absent NA NA
DIMM B8 N/A Absent NA NA
DIMM B9 N/A Absent NA NA
DIMM B10 N/A Absent NA NA
DIMM B11 N/A Absent NA NA
DIMM B12 N/A Absent NA NA
Sensor Type : Chassis Controller
<Sensor Name> <Status> <State>
Chassis Controller OK OK
/tmp # vi idraclogs
4 23:09:39 idrac8 L4, S3 [2440]: sessionmanagement_dmmapping_thread() confd (2)
4 23:09:39 idrac8 L4, S3 [2440]: request.command is 13
4 23:09:39 idrac8 L4, S3 [10297]: AddMessageToLclogEI() Obtained MUT Flag
4 23:09:39 idrac8 L4, S3 [10297]: ___ AddMessageToLclogEI : DCLCLWRAPCreateTLVLi
4 23:09:39 idrac8 L4, S3 [10297]: GetSledType() shmStatus 0 shmData0
4 23:09:39 idrac8 L5, S3 [10297]: RacadmcheckRSMStatus: This is RSM capable syst
4 23:09:40 idrac8 L4, S3 [10297]: ret is 0
4 23:09:40 idrac8 L4, S3 [10297]: probename is Chassis Controller
4 23:09:40 idrac8 L4, S3 [10297]: pCMCStatusobj->offsetKey is 24
4 23:09:40 idrac8 L4, S3 [10297]: pCMCStatusobj->sensorValue is 0
4 23:09:40 idrac8 L4, S3 [10297]: MAP Uninitialized, time to uninit = 0 millisec
4 23:09:40 idrac8 L4, S3 [10297]: RACADM total execution time: 1680 milliseconds
Sensor Type : BATTERY
<Sensor Name>
<Status> <Reading> <lc> <uc>
System Board CMOS
Battery
Ok Present NA NA
PERC1 ROMB
Battery
Ok Unknown NA NA
PERC2 ROMB
Battery
Ok Unknown NA NA
Sensor Type : PERFOMANCE
<Sensor Name>
<Status> <Status> <lc> <uc>
System Board
Power Optimized
Ok Not Degraded NA NA
Sensor Type : INTRUSION
<Sensor Name>
<Intrusion> <Status>
System Board Intrusion Closed Power ON
Sensor Type : REDUNDANCY
<Sensor Name>
<Status> <Type>
RACADM Subcommand Details 43