Reference Guide

License
Required
iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SysPassword (Read or Write)
Description
Provides the system password. Optional parameter –o <string> is used with this object to provide old
password as an authentication for changing the previously configured password to the new password.
The password can include the following:
● Up to 32 characters including whitespace.
● Contain numbers 0 through 9.
● Only lower case alphabets are accepted.
● Special characters accepted are +, ", ,, -, ., /, ;, [, \, ], `.
To enable password modification, J_EN_PASSWD must be installed.
To clear the already configured password, use the option available under F2 (system setup) during system
start.
Legal Values
String of up to 22 characters
Default Value Not Applicable
Write Privilege
Server Control
License
Required
iDRAC Express or iDRAC Enterprise
Dependency
None
BIOS.SysSecurity.SHA256SystemPassword (Read or Write)
Description
Indicates the SHA256 hash of the system password.
Legal Values String of 64 characters
Default Value Not Applicable
Write Privilege Server Control
License
Required
iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SHA256SystemPasswordSalt (Read or Write)
Description
Indicates the Salt string added to the system password before hash.
Legal Values String of 32 characters
Default Value Not Applicable
Write Privilege Server Control
License
Required
iDRAC Express or iDRAC Enterprise
Dependency None
366 Database Objects With Get and Set Commands