Reference Guide

● Up to 32 characters including whitespace.
● Contain numbers 0 through 9.
● Only lower case alphabets are accepted.
● Special characters accepted are +, ",,, — , ., /, ;, [, \, ], `.
To enable password modification, J_EN_PASSWD must be installed.
To clear the already configured password, use the option available under F2 (system setup) during system
start.
Legal Values
String of up to 22 characters
Default Value Not Applicable
Write Privilege
Server Control
License
Required
iDRAC Express or iDRAC Enterprise
Dependency
None
BIOS.SysSecurity.SHA256SetupPassword (Read or Write)
Description Indicates the SHA256 hash of the setup password.
Legal Values String of 64 characters
Default Value Not Applicable
Write Privilege Server Control
License
Required
iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SHA256SetupPasswordSalt (Read or Write)
Description
Indicates the Salt string added to the setup password before hash.
Legal Values String of 32 characters
Default Value Not Applicable
Write Privilege Server Control
License
Required
iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SignedFirmwareUpdate (Read or Write)
Description
Enables the signed BIOS update feature. Once enabled, this attribute cannot be disabled. When you change
the value from disabled to enabled, a warning message is displayed.
Legal Values
● Enabled
● Disabled
Default Value Not Applicable
Write Privilege Server Control
Database Objects With Get and Set Commands 365