Reference Guide

For using double quotation marks:
The following characters must be escaped by prepending a backward slash:
● $ (dollar sign)
● " (double quotation mark)
● ` (back quotation mark)
help and help subcommand
Table 3. help and help subcommand
Description
Lists all the subcommands available for use with RACADM and provides a short description about each
subcommand. You may also type a subcommand, group, object or Fully Qualified Descriptor (FQDD) name
after help.
Synopsis
● racadm help
● racadm help <subcommand>
Input
● <subcommand> — specifies the subcommand for which you need the help information.
● <device name> — specifies the device name such as iDRAC, BIOS, NIC, LifecycleController, FC,
system, or Storage.
● <group> — specifies the group name supported by the corresponding device.
● <object> — specifies the object for the entered group.
Output
● The help command displays a complete list of subcommands.
● The racadm help <subcommand> command displays information for the specified subcommand
only.
● The racadm help <device name> <Group> command displays information for the specified
group.
● The racadm help <device name> <Group> <Object> command displays information for the
specified object.
arp
Description
Displays the contents of the Address Resolution Protocol (ARP) table. ARP table entries cannot be added
or deleted.
To use this subcommand, you must have Debug privilege.
Synopsis
racadm arp
Input N/A
Example
racadm arp
Output
Address
HW Type HW Address Mask Device
192.168.1.1 Ether 00:0d:65:f3:7c:bf C eth0
autoupdatescheduler
Description
You can automatically update the firmware of the devices on the server.
RACADM Subcommand Details 19