Reference Guide

Legal Values
● 0 (10 MBit)
● 1 (100 MBit)
● 2 (1000 MBit)
NOTE: You cannot manually set the Network Speed to 1000 MBit. This option is available only if
cfgNetTuningNicAutoNeg is set to 1 (Enabled).
Default
1
cfgNetTuningNicFullDuplex (Read or Write)
Description
Specifies the duplex setting for the NIC. This property is used only if thecfgNetTuningNicAutoNeg is
set to 0 (disabled).
Legal Values
● 0 (Half Duplex)
● 1 (Full Duplex)
Default
1
cfgNetTuningNicMtu (Read or Write)
Description
Indicated the maximum size of units in bytes transmitted by NIC.
Legal Values
576–1500
Default
1500
cfgSensorRedundancy
This group is used to set the power supply redundancy.
The following sections provide information about the objects in the cfgSensorRedundancy group.
This group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade Servers.
cfgSensorRedundancyIndex (Read Only)
Description
Specifies index for the sensor redundancy group being read. Only power supply redundancy is supported.
Legal Values
1
Default
None
cfgSensorRedundancyPolicy (Read or Write)
Description
Sets the power supply redundancy policy.
Legal Values
● 2 — N/A, for systems that are not supported
● 3 — Non Redundant
● 4–1+1 Redundant
● 4–2+1 Redundant
● 16–2+2 Redundant
172 iDRAC Property Database Group and Object Descriptions