Reference Guide

Table Of Contents
Default
1
cfgIpmiSerialNewLineSequence (Read or Write)
Description
Specifies the new line sequence specification for the IPMI serial interface.
Legal Values
0 None
1 CR-LF
2 NULL
3 CR
4 LF-CR
5 LF
Default
1
cfgIpmiSerialLineEdit (Read or Write)
Description
Enables or disables line editing on the IPMI serial interface.
Legal Values
0(FALSE)
1(TRUE)
Default
1
cfgIpmiSerialInputNewLineSequence (Read or Write)
Description
Specifies the input new line sequence specification for the IPMI serial interface.
Legal Values
1 ENTER
2 NULL
Default
1
cfgSmartCard
This group specifies properties used to support access to iDRAC using a smart card.
The following sections provide information about the objects in the cfgSmartCard group.
cfgSmartCardLogonEnable (Read or Write)
Description
To iDRAC using a smart card, enable or disable with Remote RACADM support for access.
NOTE: Enabling with remote RACADM is only applicable for iDRAC on Rack and Tower Servers.
Legal Values
0 (Disabled)
1 (Enabled)
2 (Enabled with Remote RACADM) It is not applicable for iDRAC Enterprise on Blade Servers.
Default
0
170 iDRAC Property Database Group and Object Descriptions