Reference Guide

cfgIpmiPefAction (Read or Write)
Description
Specifies the action that is performed on the managed server when the alert is triggered.
NOTE: For iDRAC on Rack and Tower servers, this object is read-only for indexes 20, 21, and 22.
Legal Values
● 0 (None)
● 1 (Power Down)
● 2(Reset)
● 3(Power Cycle)
Default
0
cfgIpmiPefEnable (Read or Write)
Description
Enables or disables a specific platform event filter.
Legal Values
● 1(TRUE)
● 0(FALSE)
Default
1
cfgIpmiPet
This group is used to configure platform event traps on the managed server.
The following sections provide information about the objects in the cfgIpmiPet group.
cfgIpmiPetIndex (Read Only)
Description
Unique identifier for the index corresponding to the trap.
Legal Values
1–4
Default
The index value of a specific platform event trap.
cfgIpmiPetAlertDestIpAddr (Read/Write)
Description
Specifies the destination IPv4 address for the trap receiver on the network. The trap receiver receives an
SNMP trap when an event is triggered on the managed server.
Legal Values
A string representing a valid IPv4 address. For example, 192.168.0.67.
Default
0.0.0.0
cfgIpmiPetAlertEnable (Read or Write)
Description
Enables or disables a specific trap.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
iDRAC Property Database Group and Object Descriptions 151