Reference Guide

● Perform update from ftp.dell.com.
racadm update -f Catalog.xml.gz -e ftp.dell.com/Catalog -a TRUE -t FTP
● View the comparison report generated.
racadm update viewreport
ComponentType = Firmware
ElementName = PERC H730P Mini
FQDD = RAID.Integrated.1-1
Current Version = 25.2.1.0025
Available Version = 25.2.1.0029
● Perform update from an FTP repository with authentication and reboot the server to apply the updates.
racadm update -f Catalog.xml -e 192.168.11.0/Repo/MyCatalog -u user -p
xxx\n -a TRUE -t FTP
● Perform update from a HTTP repository and restart the server to apply the updates.
racadm update -f Catalog.xml -e 192.168.0/Repo/MyCatalog -a TRUE -t HTTP
● Perform update from a TFTP repository and restart the server to apply the updates.
racadm update -f Catalog.xml -e 192.168.0/Repo/MyCatalog -a TRUE -t TFTP
usercertupload
Description
Uploads a user certificate or a user CA certificate from the client to iDRAC.
To run this subcommand, you must have the Configure iDRAC permission.
Synopsis
racadm usercertupload -t <type> [-f <filename>] -i <index>
Input
● -t — Specifies the type of certificate to upload, either the CA certificate or server certificate.
○ 1=user certificate
○ 2=user CA certificate
● -f — Specifies the filename of the certificate that must be uploaded. If the file is not specified, the
sslcert file in the current directory is selected.
● -i — Index number of the user. Valid values 2–16.
Output If upload is successful, the message User certificate successfully uploaded to the RAC.
If unsuccessful, appropriate error message is displayed.
Example
To upload user certificate for user 6.
racadm usercertupload -t 1 -f c:\cert\cert.txt -i 6
usercertview
Description
Displays the user certificate or user CA certificate that exists on iDRAC.
Synopsis
racadm usercertview -t <type> [-A] -i <index>
Input
● -t — Specifies the type of certificate to view, either the user certificate or the user CA certificate.
○ 1=user certificate
RACADM Subcommand Details 109