Reference Guide

● To collect the operating system application data.
racadm techsupreport collect -t OSAppAll
● To export the collected Tech Support Report, to a CIFS share.
racadm techsupreport export -l //192.168.0/share -u myuser -p xxx
● To export the collected Tech Support Report, to an NFS share.
racadm techsupreport export -l 192.168.0:/share
● To export the collected Tech Support Report to the local file system.
racadm techsupreport export -f tsr_report.zip
testemail
Description
Sends a test email from iDRAC to a specified destination. Prior to running the test email command, make sure
that the SMTP server is configured.
The specified index in the idrac.EmailAlert group must be enabled and configured properly. For more
information, see the see the Integrated Dell Remote Access Controller (iDRAC8) and iDRAC7 RACADM
Command Line Interface Reference Guide available at dell.com/support/manuals.
Synopsis
racadm testemail -i <index>
Input -i <index> — Specifies the index of the email alert to test.
Output
Success: Test e-mail sent successfully
Failure: Unable to send test e-mail
Example
Commands for the idrac.EmailAlert group:
● Enable the alert.
racadm set idrac.EmailAlert.1.Enable 1
● Set the destination email address.
racadm set idrac.EmailAlert.1.Address [e-mail]
● Set the custom message that is sent to the destination email address.
racadm set idrac.emailalert.1.CustomMsg "This is a test!"
● Make sure that the SMTP IP address is configured properly.
racadm set idrac.remotehosts.SMTPServerIPAddress 192.168.0
● View the current email alert settings.
racadm get idrac.EmailAlert.<index>
where <index> is a number from 1 to 8.
104 RACADM Subcommand Details