Release Notes

Issue 262334:
Description
While configuring the iSCSI parameters on any Emulex adapter using an XML import and with IO Identity
Optimization set to enabled, the configuration of the
FirstTgtIscsiName
attribute fails if the length of the
configured strings is greater than 152 characters.
Resolution
Disable IO Identity Optimization and run the same job or ensure that the length of the string for the
FirstTgtIscsiName is less than 152 characters.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8 and Emulex adapters supporting iSCSI.
Issue 268731:
Description
The
Network Devices
page on the iDRAC web interface and the get NIC.IscsiInitParams command in the
RACADM interface does not list the iSCSI parameters for the QLogic 82xx adapters with iSCSI enabled.
Resolution
Use WS-MAN enumeration to view the iSCSI paramters for the QLogic 82xx adapter with iSCSI enabled.
Versions/Systems Affected
All 12th generation Dell PowerEdge system with iDRAC7 and QLogic 82xx with iSCSI enabled.
Issue 260802:
Description
If the physical drive firmware is updated using the operating system DUP, the updated firmware version is
not displayed on the iDRAC interfaces.
Resolution
Perform a host power cycle or run the racreset RACADM command.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 260633:
Description
Deleting multiple virtual disks in a single real-time configuration job fails.
Resolution
Delete one virtual disk at a time.
Versions/Systems Affected
All 13th generation Dell PowerEdge systems with iDRAC8 and PERCH830 adapter.
iDRAC – Limitations
• If floppy emulation is enabled when a bootable USB key is mounted as a Virtual Media from the Virtual
Console and if you try to delete any file from the mounted USB key (floppy), the blue screen appears
immediately.
• Web server session time-out is not exact. It is either 10% more or 15 seconds more, whichever is greater.
• WinRM and RACADM commands may become unresponsive during BIOS update or when setting BIOS,
NIC, or RAID attributes through Lifecycle Controller.
• If invalid credentials are used for the maximum login attempts, the IP is blocked for the duration of the IP
Blocking Penalty Time and a message is not displayed.