Release Notes

Issue 18:
Description
When you log in to the iDRAC web interface using Internet Explorer 8.x and prior versions, content in few
pages is not displayed properly and a few UI controls may not work.
This is a known issue with Internet Explorer.
Resolution
Internet Explorer 8.x and prior versions, are not supported browsers with iDRAC8. Ensure that you use
Internet Explorer 9 and later versions.
Version/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 19:
Description
The firmware images for all components are deleted from the firmware partition on Lifecycle Controller,
when the partition reaches 90% of space limit. After the firmware images are deleted, the rollback option
for all the components is listed as NULL, across all interfaces such as WS-MAN, RACADM, GUI and the
following log message is logged in the Lifecycle log:
"RED032: Reached maximum size limit allowed for storing firmware images. Deleted all rollback firmware
images."
Resolution
None
Versions
/
Systems
Affected
All Dell PowerEdge systems with iDRAC8.
Issue 20:
Description
If the PERC controllers have global hot spare assigned and a virtual disk is deleted, the physical disk
configured as global hot spare is not reported as hot spare through the iDRAC interface. However, the
physical disk continues to function as a global hot spare.
Resolution
Reset DRAC or power cycle the host system.
Versions
/
Systems
Affected
All Dell PowerEdge systems with iDRAC8 and out-of-band enabled PERC storage controllers.
Issue 21:
Description
In the Safari browser, if the iDRAC web session times out; clicking the Virtual Console and logging out of
the GUI page does not work.
Resolution
Instead of Virtual Console menu, choose other options like logout or other menu options, or use GUI
refresh or Browser refresh option to logout.
Versions
/
Systems
Affected
All Dell PowerEdge systems with iDRAC8.