Release Notes

Issue 61:
Description
On systems where uefidevicepath is not supported by the BIOS, if you set the firstbootdevice value to
uefidevicepath, you may notice that the BIOS reboots normally during a host reboot and the firstbootvalue
is set to Normal after a reboot.
Resolution
None
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 110977
:
Description
When IO Identity Optimization is enabled and you configure the Virtual Addresses, Storage Initiator, and Target
settings, the job runs correctly. However, ConfigResults do not list the change set.
Resolution
Refer the Lifecycle Controller logs.
Version/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 236311
:
Description
Persistence policy is not supported on ChassisSlot NIC devices.
Resolution
Reconfigure or clear the Virtual, Storage Initiator, or Target settings manually.
Version/Systems Affected
All PowerEdge blade servers on PowerEdge FX2 with iDRAC8.
Issue 206438:
Description
The possible values for the WS-MAN IOI Persistence attributes are confusing to understand.
Example:
PossibleValues = None, WarmReset, ColdReset, WarmReset, ColdReset, ACPowerLoss, WarmReset, ACPowerLoss,
ColdReset, ACPowerLoss, WarmReset, ColdReset, ACPowerLoss
Resolution
Add the –format:pretty option in the WinRM command to display the output in an understandable format
Example:
<n1:PossibleValues>None</n1:PossibleValues>
<n1:PossibleValues>WarmReset</n1:PossibleValues>
<n1:PossibleValues>ColdReset</n1:PossibleValues>
<n1:PossibleValues>WarmReset, ColdReset</n1:PossibleValues>
Versions/ Systems Affected
All Dell PowerEdge systems with iDRAC8.