Release Notes

Release Notes
Integrated Dell Remote Access Controller (iDRAC)
iDRAC is a systems management hardware and software solution that provides remote management capabilities,
crashed system recovery, and power control functions for Dell PowerEdge systems.
Lifecycle Controller (LC-GUI)
An out-of-band mechanism for configuring the platform, applying firmware updates, saving or restoring a system
backup, or deploying an operating system, either by using a GUI or a remote scripting language. Lifecycle Controller
GUI provides advanced embedded systems management and is delivered as part of Integrated Dell Remote Access
Controller 8 (iDRAC8). The GUI enables remote systems management in a one-to-one method and is accessible by
pressing F10 during system boot.
Lifecycle Controller Remote Services (LC-RS)
LC-RS provides advanced embedded systems management and is delivered as part of iDRAC8 and iDRAC7. LC-RS
enables remote systems management in a one-to-many method. Remote Services uses WS-Management (WS-MAN)
protocol based Web services interface to remotely provision and manage the servers.
---------------------------------------------------------------------------------------------------------------
Version
iDRAC 2.30.30.30 (applies to both iDRAC7 and iDRAC8)
Lifecycle Controller 2.30.30.30
Release Date
March 2016
Previous Version
2.21.21.21 (iDRAC8 and iDRAC7 with Lifecycle Controller)
2.22.22.22 (iDRAC8 with Lifecycle Controller)
2.23.23.23 (iDRAC 8 with Lifecycle Controller)
Importance
RECOMMENDED: Dell recommends applying this update during your next scheduled update cycle. The update
contains feature enhancements or changes that will help keep your system software current and compatible with other
system modules (firmware, BIOS, drivers, and software).
Platform(s) Affected
iDRAC8 and LC is supported on the following systems:
 PowerEdge T130
 PowerEdge R230
 PowerEdge R330
 PowerEdge T330
 PowerEdge FD332
 PowerEdge R430
 PowerEdge T430
 PowerEdge FC430
 PowerEdge R530
 PowerEdge R530XD