Release Notes

Issue 27:
Description
(Virtual) Keyboard stopped working on iDRAC Virtual Console, but the mouse movements continues to work.
Resolution
Exit and restart Virtual Console. If the Virtual Media was in use, ensure that it is activated (Connect and Map media).
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 28:
Description
Infrequently, iDRAC logs the following message to the Lifecycle Controller log:
PWR2262 "The Intel Management Engine has reported an internal system error."
Also, logs the following within the next few minutes:
PWR2264 "The Intel Management Engine has reported normal system operation."
Resolution
No action required.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 29:
Description
In the iDRAC web interface, the following storage pending operations status is not displayed in Pending Operations
pop-up message and Storage->Pending Operations page:
 Virtual Disk(s) - Encrypt operations.
 Controller(s) - Create, Modify, or Delete security key operations.
 Controller(s) - Import or Clear Foreign Configuration operations.
 PCIe SSD(s) - Secure Erase or Prepare to Remove operations.
Resolution
None.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 30:
Description
When a passive backplane (that is not connected to PERC) is updated from the operating system, the System Inventory
page in the iDRAC web interface does not display the updated version.
Resolution
Reset iDRAC using racadm racreset command.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC8.
Issue 31:
Description
If you log in to the iDRAC8 web interface with Login and Config iDRAC privilege, then on the Update and Rollback
page, an additional Firmware Settings submenu appears.